cisco Switch 1000

[avdhesh]

how to disable the MODE button ? (disable the factory reset function) , 

Hi all,

I need to disable the "press MODE button more than 10seconds" factory-reset feature.

The button is way too close to port 1 and I have a real life example of someone erasing the switch config 

how i can prevent switch  to factory - Reset 

Thanks in advanced 

[Kasun Bandara]

@avdhesh use below command in global config mode.

#no setup express

[avdhesh]

This Command is not available on cisco 1000 #no setup express

[pieterh]

>>> This Command is not available on cisco 1000 #no setup express <<<
-> this statemen is incorrect, see output below "setup express" is available, and also the "no setup express"

Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 10 C1000-8FP-2G-L 15.2(7)E7 C1000-UNIVERSALK9-M

switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#setup express
switch(config)#no setup express
switch(config)#

[Kasun Bandara]

@avdhesh use it in global config mode.