11-28-2016 07:11 AM - edited 03-08-2019 08:19 AM
Community
I have a switch catalyst 2960-X series, to which I connect two access points that support Up to 100 users each.
I have connection problems since the access point loses connection momentarily
In the documentation of the switch each port has to be configured, either Desktop, cisco switch, cisco router, access point. Etc
In the help page, setting the port as an access point it says the following:
"Apply this profile to the ports to be connected to wireless access points. The access point can provide access to the network to a maximum of 30 mobile (wireless) users."
There is way to remove that restriction in the port, since my equipment support more.
Thank you.
11-28-2016 09:29 AM
Hi,
What document is that?
Can you provide a link to it?
11-28-2016 10:04 AM
11-28-2016 11:46 AM
That is fine. I saw it in the attachment. I don't think that comment is correct, as the number of mobile devices support by an AP is based on the AP itself and not the switch port. The switch port does not impose how many devices can connect to an AP.
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide