03-13-2023 03:27 AM
Hi,
I have a cisco switch C9200-48T and it cannot boot because there is no image on the switch. I tried with several proposals to transfer image but unsuccessfully, I tried also with Xmodem but it seems that flash is read only.
Here is what inputs I have:
switch: dir
usage:
dir <path-to-directory>
supported filesystem(s):
flash: ro flash
usbflash0: rw front-panel USB 0
usbflash1: rw front-panel USB 1
switch: dir flash:
Attributes Size Name
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
switch: dir usbflash0:
media drive "usbflash0:" not present.
Error[11]: Failed to open directory!
switch: dir usbflash1:
media drive "usbflash1:" not present.
Error[11]: Failed to open directory!
switch: copy xmodem: flash:cat9k_lite_iosxe.17.06.04.SPA.bin
Unsupported destination device/filesystem.
Solved! Go to Solution.
03-13-2023 07:13 AM
@tomipandaziev you need to have properly formatted USB. try below diskpart commands in windows computer. then plug USB to switch and restart. share the output of console when loading the switch.,
diskpart
list disk
select disk <INDEX OF USB DISK>
clean
convert mbr
create part primary size=4000
active
03-13-2023 04:51 AM
you need to make sure flash drive is in FAT format.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide