03-04-2018 06:14 PM - edited 03-08-2019 02:07 PM
i am not getting access switch login through telnet but i can login through web browser in Cisco sg300-28 switch but telnet service is enable.
In switch Telnet Service is enable but i can not login my switch through telnet but i can login in web browser.
Ping is working
This is System Information
Software Information |
|
1.3.0.62 | |
22347bc1ad4f7f75526896a565dc71c5 | |
1.3.0.62 | |
22347bc1ad4f7f75526896a565dc71c5 | |
1.1.0.6 | |
8c6b1f42c0754ab9c70324a815a45f08 | |
en-US | |
1.3.0.62 | |
N/A | |
Solved! Go to Solution.
03-05-2018 01:59 AM
I am not familiar with these switches, but I believe they are basic and have limited CLI.
Ping is immaterial.
In any case, in the interests of security, I would recommend against the use of Telnet and HTTP, instead SSH and HTTPS should be configured, respectively.
Martin
03-05-2018 12:44 AM
03-05-2018 01:59 AM
I am not familiar with these switches, but I believe they are basic and have limited CLI.
Ping is immaterial.
In any case, in the interests of security, I would recommend against the use of Telnet and HTTP, instead SSH and HTTPS should be configured, respectively.
Martin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide