Cisco Switch SG300-28

[muraripadhan]

i am not getting access switch login through telnet but i can login through web browser in Cisco sg300-28 switch but telnet service is enable.

In switch Telnet Service is enable but i can not login my switch through telnet but i can login in web browser.

Ping is working

This is System Information

Software Information
Firmware Version (Active Image):	1.3.0.62
Firmware MD5 Checksum (Active Image):	22347bc1ad4f7f75526896a565dc71c5
Firmware Version (Non-active):	1.3.0.62
Firmware MD5 Checksum (Non-active):	22347bc1ad4f7f75526896a565dc71c5
Boot Version:	1.1.0.6
Boot MD5 Checksum:	8c6b1f42c0754ab9c70324a815a45f08
Locale:	en-US
Language Version:	1.3.0.62
Language MD5 Checksum:	N/A

[Georg Pauwen]

Hello,

the first thing you would want to do is upgrade the firmware, the one you have installed is outdated. Attached is the latest version, 1.4.8.06. (rename the .jpg to .ros).

[Martin Carr · Accepted solution]

I am not familiar with these switches, but I believe they are basic and have limited CLI.

Ping is immaterial.

In any case, in the interests of security, I would recommend against the use of Telnet and HTTP, instead SSH and HTTPS should be configured, respectively.

Martin