08-27-2019 09:51 PM
Hi expert
I would like to know what is cisco "++=" mean as shown below
C6800-8P10G=
C6800-8P10G++=
I can see both price is same, so what is the difference between it?
08-27-2019 11:32 PM - edited 08-27-2019 11:37 PM
Hello Anwar,
according to the datasheet below
There are two models of 8 x 10GE linecards, the second one using a more powerful DFC4 XL
>> Two models: C6800-8P10G, an 8-port 10-Gigabit Ethernet Fiber Module with DFC4 (Figure 3), and C6800‑8P10G-XL, an 8-port 10-Gigabit Ethernet Fiber Module with DFC4XL
I agree that there is no occurrence in cisco web site of part number C6800-8P10G++=
Have you found it on CCW tool ?
I see both entries on the CCW and with the same comments .
The C6800-8p10G= has 28 days of lead time, the C6800-8P10G++= has 56 days of lead time and it has flagged C as configurable. Also the C6800-8P10G= has the C flag and the SVIP flag.
The Configurable refers to the SFP+ optics that can be selected with the product.
Both supports 10GE SFP+ and GLC GE ports.
the C6800-8P10G= reports HW version 2.0, the C6800-8P10G++= reports HW version 1.0.
It would be better to consider the following about the DFC4 vs. DFC4XL, if you don't need a DFC4XL I would go for the C6800-8P10G= because it is the ufficial part number and the delivery time is 28 days vs. 56 days.
IF your device needs to handle a full BGP internet table you would need the XL version of the linecard
>>
Hope to help
Giuseppe
08-28-2019 12:14 AM
"++=" means SPARE
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide