cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2693
Views
0
Helpful
3
Replies

Cisco WS-C2960X-48TD - BOOT FAIL at the start - blue SYST light - no reaction for anything

mmatveyev1
Level 1
Level 1

Hi folks,

I really need help with finding solution to what can be done to back that switch to the working mode ?

Only one repeating message at the start on the console - BOOT FAIL.

I can't go into rommon, can't do anything, except that error no any other messages and SYST light is blue color.

Cisco is too far to return back for repair in the other far country.

Is there any chance try boot or recover it via USB or serial image load somehow ?

3 Replies 3

mmatveyev1
Level 1
Level 1

Actual console looks like this (see image)

Leo Laohoo
Hall of Fame
Hall of Fame

Console into the switch and reboot.  We want to see the entire boot-up process to be able to determine what is wrong with the switch.

I'm on a console right now. It's immediately after reboot start showing BOOT FAIL error, no any other messages. I connected via serial cable console to RJ-45 console port. Should I try USB port too ?

Review Cisco Networking for a $25 gift card