01-23-2015 11:02 PM - edited 03-07-2019 10:21 PM
Hi all ,
give me some insight from the process below . is the hike is high or normal ?
sh processes cpu | ex 0.00%
CPU utilization for five seconds: 38%/24%; one minute: 38%; five minutes: 38%
Sw2
sh processes cpu | ex 0.00%
CPU utilization for five seconds: 44%/28%; one minute: 36%; five minutes: 36%
Please see the atttached file for the details
Thank you
01-23-2015 11:28 PM
Hi,
Can you give me the following outputs:
1- show proc cpu sorted | ex 0.00
2- show proc cpu history
3- show log
4- show span detail | in ieee|from|occur|is exec
regards
Inayath
01-24-2015 07:58 AM
Do you have SVIs on this switch? How many? If you have HSRP configured, please provide the output from "sh standby brief"? As Inayath requested, STP info will be helpful too.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide