cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
571
Views
0
Helpful
2
Replies

%CLS-3-CLSFAIL and %CLS-3-BOGUSOP

rparrat666
Level 1
Level 1

Hi experts,

I’m receiving the errors:

%CLS-3-CLSFAIL: CLS: Assertion failed: file "../cls/cls_entitymanager.c", line
3446
this->fCepState == kCepStateConnectReqPending -Traceback= 0x60F6DA94 0x610A909C 0x60EACE4C 0x60E
A8390 0x60EAEB20 0x61E51184 0x61E50864 0x61E50E50 0x60EAC2F8 0x60EA76F0 0x60EAEA5C 0x610DEA48 0x
61101780 0x624DFC5C 0x6110257C 0x61101724


%CLS-3-BOGUSOP: Unknown CLS verb for STATION context, DlcOpcodeT=0015 -Tracebac
k= 0x60F6DA94 0x60EA82B0 0x60EAEB0C 0x61E51184 0x61E5231C 0x61E70214 0x601430A0 0x6014BCAC 0x600
A6FA8 0x600A734C

The other info I found about the %CLS-3-CLSFAIL is:

“This message does not affect functionality.

It indicates that a race condition has occurred between DLSw and the LLC2 layers when cleaning up an LLC2 session that timed-out during the XID exchange process.”

And no info for the CLS-3-BOGUSOP error (other than that I should be screaming to the tech support for help, that’s all the error decoder or the output interpreter shows about this messages).

So I have no idea about those errors, any help?

Thanks, and by the way, do anyone knows how to check tracebacks other than opening a TAC case?

The output interpreter always shows a time error (after putting the sh ver info).

Thanks.

1 Accepted Solution

Accepted Solutions

schinnap
Level 1
Level 1
You are hitting bug CSCdm84125.This is a cosmetic bug with CLS (Cisco Link Services). DLSw+ uses the services of CLS. The traceback does not affect operation. Since it is a cosmetic issue it was not fixed in 12.0, so in order to get rid of those messages I suggest you to consider the possibility of the upgrade to 12.1(20).


Please, before the upgrade check the minimum memory requirements

Thanks,
Suresh

View solution in original post

2 Replies 2

schinnap
Level 1
Level 1
You are hitting bug CSCdm84125.This is a cosmetic bug with CLS (Cisco Link Services). DLSw+ uses the services of CLS. The traceback does not affect operation. Since it is a cosmetic issue it was not fixed in 12.0, so in order to get rid of those messages I suggest you to consider the possibility of the upgrade to 12.1(20).


Please, before the upgrade check the minimum memory requirements

Thanks,
Suresh

bugId=CSCsw98838

We weill fix it with 12.4(25b), cause the new 15 needs more RAM and FLAS.

Thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: