command LACP max-bundle

[fares sakaa]

Hello 

I've a switch nexus TP3048 I'm trying to create port channel with two associated ports , one with low priority will be as an active link and the other will be as hot standby.

I'm trying to achieve this by limiting the max-bundle links to 1.

but the command  lacp max-bundle doesn't exist on nexus tp3048.

[balaji.bandi]

what code running on the device. check the Limitation :

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/interfaces/7_x/b_Cisco_Nexus_3000_Series_NX-OS_Interfaces_Configuration_Guide_7x/b_Cisco_Nexus_3000_Series_NX-OS_Interfaces_Configuration_Guide_7x_chapter_011.html

[MHM Cisco World]

lacp min-links number

lacp max-links number

lacp port-priority priority

It finally add to nexus check above 

MHM