cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2668
Views
3
Helpful
3
Replies

command to check 6500 switch performance or resource usage

Difan Zhao
Level 5
Level 5

Hi experts,

I am on a call right now troubleshooting some latency issue. The CPU usage on the sup card is low. Don't see any drops or input errors. I am aware that the switch and its modules have capability limits. Is there command I can run which will tell me if any module is overloaded or if the fabric/backplane is over utilized?

My chassis is WS-C6513 and sup card is WS-SUP720-3B

Thanks!

1 Accepted Solution

Accepted Solutions

InayathUlla Sharieff
Cisco Employee
Cisco Employee

Hi,

The following commands would be usefull to you:

6500#show platform hardware capacity fabric

6500#show platform hardware capacity

6500#show platform stats

Regards,

Inayath

View solution in original post

3 Replies 3

Jeff Orr
Level 5
Level 5

Show platform hardware capacity fabric

show sys (some iOS versions)

InayathUlla Sharieff
Cisco Employee
Cisco Employee

Hi,

The following commands would be usefull to you:

6500#show platform hardware capacity fabric

6500#show platform hardware capacity

6500#show platform stats

Regards,

Inayath

Difan Zhao
Level 5
Level 5

Thank you guys. You posts have been rated.