configuration example of unchannelized t1

[sarahr202]

Hi everybody.

Lan--R1------T1------R2---lan

Above we are using unchannelized t1 to provide connectivity between R1 and R2.

I just need an example as to how we configure R1 above for unchannelized T1 connection.

I really appreciate your help.

thanks. and have a great day.

[Reza Sharifi · Accepted solution]

Hi Sarah,

Here is a sample config for one side:

service-module t1 clock source internal
service-module t1 timeslots 1-24 speed 64
service-module t1 framing esf
service-module t1 linecode b8zs
ip address 10.1.1.1 255.255.255.0

and here is a link to it:

http://www.cisco.com/en/US/products/hw/modules/ps3129/products_tech_note09186a0080093d70.shtml#sample_config

HTH

Reza