Hello,
We have configured ITD on both the Core nexus switches to redirect traffic towards the proxy server. After which we can see that the packets are being redirected towards the proxy servers.
The requirement is that without any sort of Proxy configuration on the web browser the client should be able to browse the internet (as ITD will redirect traffic through the proxy), but it is not happening.
Could you please suggest any other configuration changes that will be needed in order to make it work.
Note: Both 9372PX switches are in vPC.
Please find the ITD Configuration and statistics below:
Core 1
itd device-group PROXY_ITD
probe icmp
node ip 10.233.2.251
standby ip 10.233.2.252
itd http
device-group PROXY_ITD
ingress interface Vlan64
exclude access-list EXCLUDE_ITD
no shut
sh itd all statistics
Service Device Group
-----------------------------------------------------------
http PROXY_ITD
0%
Traffic Bucket Assigned to Mode Original Node #Packets
--------------- -------------- ----- -------------- ---------
http_itd_bucket_1 10.233.2.251 Redirect 10.233.2.251 9691 (100.00%)
Core 2
itd device-group PROXY_ITD
probe icmp
node ip 10.233.2.251
standby ip 10.233.2.252
itd http
device-group PROXY_ITD
ingress interface Vlan64
exclude access-list EXCLUDE_ITD
no shut
sh itd all statistics
Service Device Group
-----------------------------------------------------------
http PROXY_ITD
0%
Traffic Bucket Assigned to Mode Original Node #Packets
--------------- -------------- ----- -------------- ---------
http_itd_bucket_1 10.233.2.251 Redirect 10.233.2.251 5367 (100.00%)
