cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
342
Views
0
Helpful
3
Replies
Heinz Kern
Beginner

Configuration lock due to rollback

hello,

i do have an issue C2960-LANBASEK9-M, Version 12.2(55)SE5

 

the configuration is locked due to the rollback-feature (configure terminal revert timer). the problem is that it seems to be stuck...it started to revert the config but was not able to finish...and now i am not able to enter the config mode anymore.

Configuration mode locked exclusively by user 'unknown' process '12' from terminal '0'. Please try later.

does anybody have an idea how to overcome the situation?

 

ic-s-bih-int-2#show configuration lock
Parser Configure Lock
---------------------
Owner PID                        : 12
User                             : unknown
TTY                              : 0
Type                             : EXCLUSIVE
State                            : LOCKED
Class                            : ROLLBACK
Count                            : 1
Pending Requests                 : 0
User debug info                  : Rollback
Session idle state               : TRUE
No of exec cmds getting executed : 0
No of exec cmds blocked          : 0
Config wait for show completion  : FALSE
Remote ip address                : Unknown
Lock active time (in Sec)        : 2335
Lock Expiration timer (in Sec)   : 600

3 REPLIES 3
Richard Burts
Hall of Fame Guru

Have you tried a reload or power cycle?

HTH

Rick

reloading is something i want to avoid. because it means business outage...

Reza Sharifi
Hall of Fame Expert

Hi,

Are you able to access the switch via console port?

HTH