01-16-2015 08:02 AM - edited 03-07-2019 10:15 PM
Hi all,
I use to configure network module NM-16ESW, but it doesn't work when this NM is inserted into 3725 IOS12.3(10).
I would like to configure port as follows:
interface FastEthernet2/13
description WAN to Suez over 1620
no switchport access vlan
ip address x.X.X.X 255.255.255.0
no shutdown
clns router isis djibouti
isis metric 3
end
I've got the following error message in conf mode:
djibrt103(config-if)#no switchport access vlan
djibrt103(config-if)#ip address 10.105.104.17 255.255.255.0
% IP addresses may not be configured on L2 links.
djibrt103(config-if)#
01-18-2015 08:07 PM
The NM-16ESW is Layer 2 Network Module card. You can only config IP address in vlan interface.Please read the Document as following.
01-19-2015 02:20 AM
Thank you very much for your answer.
But I disagree with you because, I have exactly the same board "NM-16ESW" inserted into a 2911 (with SM-NM adpator).
The following configuration perfectly works:
interface FastEthernet1/8
no switchport
ip address 10.103.30.2 255.255.255.248
ip ospf cost 30
!
I'm wondering if the board features depend on the IOS ??
extract of sh diag
Slot 1:
SM-NM-ADPTR
Port Adapter is analyzed
Port Adapter insertion time 9w5d ago
EEPROM contents at hardware discovery:
PCB Serial Number : FOC14455113
Hardware Revision : 1.0
Part Number : 73-12434-04
Top Assy. Part Number : 800-32481-01
Board Revision : E0
Deviation Number : 0
Fab Version : 05
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : SM-NM-ADPTR
...
FastEthernet Port adapter, 16 ports
Port adapter is analyzed
Port adapter insertion time 9w5d ago
EEPROM contents at hardware discovery:
Hardware Revision : 1.0
Top Assy. Part Number : 800-15156-02
Board Revision : D0
Deviation Number : 0-0
Fab Version : 03
PCB Serial Number : FOC144714GE
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Base MAC Address : d0d0.fd3b.5536
MAC Address block size : 17
Product (FRU) Number : NM-16ESW
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide