cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4899
Views
0
Helpful
4
Replies

Configuration register is 0xF

Hi All,

 

I have a C2960S switch where the config reg value is 0xF. This switch is rebooting frequently. 

 

Can anybody tell me about this?

 

Switch>show ver | beg Switch Ports
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 52 WS-C2960S-48LPD-L 12.2(55)SE7 C2960S-UNIVERSALK9-M


Configuration register is 0xF

 

Thanks!

4 Replies 4

Leo Laohoo
Hall of Fame
Hall of Fame

@Rawiah Toukheer Aftab wrote:

Configuration register is 0xF

 


That's normal. 


@Rawiah Toukheer Aftab wrote:

This switch is rebooting frequently. 

 


Post the complete output to the following commands: 

1.  sh version; and 

2.  dir

Switch#sh ver
Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 12.2(55)SE7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 28-Jan-13 10:28 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x01B00000

ROM: Bootstrap program is Alpha board boot loader
BOOTLDR: C2960S Boot Loader (C2960S-HBOOT-M) Version 12.2(55r)SE, RELEASE SOFTWARE (fc1)

Switch uptime is 1 hour, 52 minutes
System returned to ROM by power-on
System restarted at 04:59:43 UTC Fri Jul 6 2018
System image file is "flash:/c2960s-universalk9-mz.122-55.SE7/c2960s-universalk9-mz.122-55.SE7.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C2960S-48LPD-L (PowerPC) processor (revision G0) with 131072K bytes of memory.
Processor board ID FOC1724Y03M
Last reset from power-on
4 Virtual Ethernet interfaces
1 FastEthernet interface
50 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : EC:E1:A9:0B:D8:00
Motherboard assembly number : 73-12426-10
Power supply part number : 341-0393-02
Motherboard serial number : FOC172217S3
Power supply serial number : DCA1717U1JF
Model revision number : G0
Motherboard revision number : A0
Model number : WS-C2960S-48LPD-L
Daughterboard assembly number : 73-11933-04
Daughterboard serial number : FOC17234H8M
System serial number : FOC1724Y03M
Top Assembly Part Number : 800-32460-04
Top Assembly Revision Number : A0
Version ID : V04
CLEI Code Number : COMGC00ARD
Daughterboard revision number : A0
Hardware Board Revision Number : 0x01


Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 52 WS-C2960S-48LPD-L 12.2(55)SE7 C2960S-UNIVERSALK9-M


Configuration register is 0xF

 

Switch#dir
Directory of flash:/

586 -rwx 5144 Mar 1 1993 00:02:54 +00:00 multiple-fs
2 -rwx 1996 Mar 1 1993 00:02:48 +00:00 vlan.dat
4 -rwx 12295 Apr 13 2018 20:17:39 +00:00 config.text
5 -rwx 5464 Apr 13 2018 20:17:39 +00:00 private-config.text
6 drwx 512 Mar 1 1993 00:14:43 +00:00 c2960s-universalk9-mz.122-55.SE7

57931776 bytes total (42626048 bytes free)


@Rawiah Toukheer Aftab wrote:

System returned to ROM by power-on


No crashinfo folder present in the flash and "sh version" shows the switch is having power problems.  

Check the power feed or power outlet where the appliance is drawing power from.

Thank you for the info !

Review Cisco Networking for a $25 gift card