Hi Friends,
I
have a 3825 router having HWIC-8A async card, and want to cnfigure that
for terminal server connectivity. I believe it will have different
config to NM-16A module config. any advice please.
Thanks..
Arun
Hi Arun,
You may want to take a look at this doc:
http://www.cisco.com/en/US/docs/ios/interface/configuration/guide/ir_nm16as.html
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a008014f8e7.shtml
It has been a while since I have used the async interfaces on a 25xx series device. I have used the async mod on a 2600 and aside from setting baud rate, parity, etc.
hope that helps.
Ganesh.H
Remember to rate helpful post