09-22-2013 01:38 AM - edited 03-07-2019 03:36 PM
Good Morning Dears,
Kindly note that i've a two Cisco catalyst 6513-E stacked togther over VSS. Sups are "Cat 6500 Sup 2T with 2 x 10GbE and 3 x 1GbE with MSFC5 PFC4". IOS is "s2t54 Software (s2t54-ADVENTERPRISEK9-M), Version 15.1(1)SY, RELEASE SOFTWARE (fc2)"
I was asked to configure our core switch for Netflow configuration, the target is to send the traffic flow between 10 user Vlans (source) to 2 server vlans (destination) to a flow exporter.
As per the below documents, I prepared the configuration as per the below
conf t
!
mls netflow
mls flow ip full
!
! --Servers Vlans
!
!
interface Vlan110
ip route-cache flow
!
interface Vlan111
ip route-cache flow
!
!
! --Users Vlans
!
interface Vlan1
ip route-cache flow
!
interface Vlan2
ip route-cache flow
!
interface Vlan3
ip route-cache flow
!
interface Vlan4
ip route-cache flow
!
interface Vlan5
ip route-cache flow
!
interface Vlan6
ip route-cache flow
!
interface Vlan7
ip route-cache flow
!
interface Vlan8
ip route-cache flow
!
interface Vlan9
ip route-cache flow
!
interface Vlan10
ip route-cache flow
!
ip flow ingress layer2-switched vlan 1,2,3,4,5,6,7,8,9,10,110,111
!
mls nde sender version 5
!
ip flow-export source loopback 0
!
ip flow-export destination X.X.X.X 2055
!
ip flow export layer2-switched vlan 1,2,3,4,5,6,7,8,9,10,110,111
But while uploading it to the switch I got the following error “Warning: Command is no longer supported, please use Flexible NetFlow commands.”
Is the Flexible Netflow can give me the same functionality of older Netflow? After a quick search I couldn’t find how to specify the source and destination vlan interfaces as before… any help?
Thanks in advance
09-22-2013 08:18 AM
Hi,
Follow this document for Sup-2T Netflow Enhancements.
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/white_paper_c11-652021.html
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide