Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
1246
Views
5
Helpful
2
Replies

Configuring NetFlow in VRF Environment?

Go to solution
CiscoBrownBelt
Level 6
Level 6

‎02-11-2020 06:06 PM

You basically can use the same NetFlow monitor and apply it under any VRF forwarding interface on a switch or router correct? 

Labels:
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
Jaime Saldana Morales
Cisco Employee
Cisco Employee

‎02-11-2020 08:35 PM

Hi CiscoBlueBelt,

 

Yes Netflow will work with VRF's.

 

interface GigabitEthernet0

ip vrf forwarding test

ip address 1.1.1.1 255.255.255.252

ip flow monitor test output

 

Regards,

 

Jaime Saldana

View solution in original post

2 Replies 2

Go to solution
Jaime Saldana Morales
Cisco Employee
Cisco Employee

‎02-11-2020 08:35 PM

Hi CiscoBlueBelt,

 

Yes Netflow will work with VRF's.

 

interface GigabitEthernet0

ip vrf forwarding test

ip address 1.1.1.1 255.255.255.252

ip flow monitor test output

 

Regards,

 

Jaime Saldana

Go to solution
CiscoBrownBelt
Level 6
Level 6
In response to Jaime Saldana Morales

‎02-15-2020 04:26 PM

High what about IPSEC tunnels or any tunnel?
0 Helpful
Customers Also Viewed These Support Documents
Review Cisco Networking for a $25 gift card