03-25-2013 04:49 AM - edited 03-07-2019 12:28 PM
HI
I need to configure configuring pppoe ADSL on cisco 887VG
Any body advise on this
03-25-2013 04:57 PM
Asim,
Have a look at this posting.
There is a full config for pppoe
https://supportforums.cisco.com/thread/2187115
Regards,
Alex.
Please rate useful posts.
03-25-2013 11:39 PM
HI,
i already see that post but the issue is there is no ATM interface present .below are interface spresent on my router
!
controller VDSL 0
!
controller Cellular 0
!
vlan 10
name DATA
!
!
!
!
!
!
!
!
interface Ethernet0
no ip address
shutdown
!
interface FastEthernet0
no ip address
!
interface FastEthernet1
no ip address
!
interface FastEthernet2
no ip address
!
interface FastEthernet3
no ip address
!
interface Cellular0
no ip address
encapsulation ppp
!
!
controller VDSL 0
!
controller Cellular 0
!
vlan 10
name DATA
!
!
!
!
!
!
!
!
interface Ethernet0
no ip address
shutdown
!
interface FastEthernet0
no ip address
!
interface FastEthernet1
no ip address
!
interface FastEthernet2
no ip address
!
interface FastEthernet3
no ip address
!
interface Cellular0
no ip address
encapsulation ppp
!
03-26-2013 12:30 AM
This model does not support ADSL, it is VDSL2 and 3G only.
You would need an 887VA for ADSL and VDSL support.
Sent from Cisco Technical Support iPad App
03-26-2013 12:36 AM
HI,
Thanks for your reply.
Can you let me know any document which support this
03-26-2013 12:46 AM
http://www.cisco.com/en/US/prod/collateral/routers/ps380/data_sheet_c78_459542_ps380_Products_Data_Sheet.html
Sent from Cisco Technical Support iPad App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide