11-30-2010 02:56 PM - edited 03-06-2019 02:17 PM
Hello
I have a client that has the following infraestructure:
N5K-C5010P-BF N5000 1RU Chassis no PS 2 Fan Module 20 ports (req SFP)
needs to connect to this switch WS-C3750E-24TD-S 10GB with the following module: X2-10GB-SR =.
My question is possible make that connection?
which module in the Nexus 5000? SFP-10G-SR (=) ?
I can confirm there is a cisco cable to connect the two modules that is 7 meters or more? If the cable did not exist I can confirm what I require is a cable with a tip for LC SFP-10G-SR (=) and the other end SC X2-10GB-SR = with the following features Wavelength (nm ) 850, Core Size (microns) 62.5, Modal Bandwidth (MHz * km) 160 or any of the following cable?
Cisco SFP+ | |||||
Cisco SFP-10G-SR |
Solved! Go to Solution.
12-06-2010 11:24 AM
To be more clear. X2 has optical interoperability with respective 10GBASE
SFP+ modules on the same link.
SFP+ datasheet, Table 1:
http://www.cisco.com/en/US/prod/collateral/modules/ps5455/data_sheet_c78-455693.html
X2 datasheet, Table 1.:
12-06-2010 11:12 AM
You should be able to find what you are looking for in the compatability matrix:
--
Nelson
12-06-2010 11:24 AM
To be more clear. X2 has optical interoperability with respective 10GBASE
SFP+ modules on the same link.
SFP+ datasheet, Table 1:
http://www.cisco.com/en/US/prod/collateral/modules/ps5455/data_sheet_c78-455693.html
X2 datasheet, Table 1.:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide