06-28-2007 08:36 AM - edited 03-05-2019 05:01 PM
I am having an issue with our cat6509 switch, running ios not catos. I am unable to make a ssh connection. I verified the settings look fine. I checked to make sure i didnt have any hung sessions. That looks fine also. Anyone ever have a similar problem? Not sure where to check next.
06-28-2007 08:48 AM
Brad,
Please paste the switch configuration. If SSH is configured properly, have you allowed it on the VTY lines. Please do the following:
config t
line vty 0 4
transport input all or transport input ssh
HTH,
-amit singh
06-28-2007 10:37 AM
That was already done. I am posting partials here:
This is what i'm seeing for users
car01>show users
Line User Host(s) Idle Location
* 0 con 0 admin idle 00:00:00
1 vty 0 idle 3w0d 88.42.170.195
2 vty 1 idle 3w0d 88.42.170.195
3 vty 2 idle 6w0d 60.18.161.58
4 vty 3 idle 3w0d 88.42.170.195
5 vty 4 idle 3w0d 88.42.170.195
here are some parts of the config:
ip ssh time-out 30
ip ssh authentication-retries 2
ip ssh source-interface GigabitEthernet9/48
line con 0
line vty 0 4
access-class 100 in
password 7 ***************************
transport input ssh
06-28-2007 10:38 AM
I am unable to kill the vty idle connections
06-28-2007 04:59 PM
Did you try "clear line vty X " command ? May be a bug .
06-28-2007 10:47 AM
Brad,
Have you generated your crypto key. Please refer to the following url for the SSH configuration steps.
Hope this helps,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide