Connectivity issue between CIsco and Juniper Ex4200 switch
we have connectivity between cisco and Juniper Ex 4200 switch with only acces port configuration .But in Juniper Switch its showing stp blocking mode ,Can anyone help me in this below are my switch config
interface GigabitEthernet1/0/24 switchport access vlan 55 switchport mode access speed 100 duplex full end
1489654@IN_CHN_FUT_T3_L3A_11> show configuration | display set |match ge-0/0/36 set interfaces ge-0/0/36 no-traps set interfaces ge-0/0/36 ether-options link-mode full-duplex set interfaces ge-0/0/36 ether-options speed 100m set interfaces ge-0/0/36 unit 0 family ethernet-switching port-mode access set interfaces ge-0/0/36 unit 0 family ethernet-switching vlan members VC set protocols rstp interface ge-0/0/36.0 edge
how do we restrict a router interfaces from directly connected to Some vlans? can any one help me to figureout?the question is Router should not have interfaces directly connected to Vlan 30 and Vlan 40
I've got a one problem. Me and my friend have the same ISP. I checked my External IP address at WhatIsMyIp.com and my friend do it to. And we saw we have the same External IP.So my question is can 2 routers have the same External IP address?If i'm right 2...
LISP Protocol (Location Identifier Separation Protocol)! - The LISP protocol has become a brilliant stardom with the digital transformation that we are now experiencing. - Today we will talk about the LISP protocol and its advantages and method of p...
SD-Access provides automated end-to-end services (such as segmentation, quality of service, and analytics) for user, device, and application traffic. SD-Access automates user policy so organizations can ensure the appropriate access control and applicati...