05-31-2017 04:22 PM - edited 03-08-2019 10:48 AM
Dears,
I want to apply copp and coppr on my router, I know the commands and the way to apply but I don't know what should be classified for the copp and coppr, in other words what I shld analyze so that I can called those stuff in class-map for copp and coppr
thanks
05-31-2017 04:57 PM
Hi,
Here is a sample config you maybe able to use.
https://skminhaj.wordpress.com/2016/02/16/copp-control-plane-policing/
HTH
06-04-2017 01:53 PM
Dear Reza,
Any configuration example for CoPPr , Any blog or post in which it makes easy understand to configure and apply coppr for the routers.
thanks
06-04-2017 02:34 PM
Hi,
I have never heard of coppr and not sure what that is.
06-05-2017 05:04 AM
Dear Reza,
Here is the link which says about cPPr
http://www.cisco.com/c/en/us/td/docs/ios/12_4t/12_4t4/htcpp.html#wp1096911
06-07-2017 06:05 AM
Dears
I dont get any control-plane host or transit or cef-exceptional command in 4331 IOS xe router
-CPE01(config)#control-plane ?
<cr>
CPE01(config)#control-plane ?
06-07-2017 06:05 AM
Hi,
You you need to enter the control-plane mode first. Than under control-plane you will see the option for service-policy.
HTH
06-07-2017 01:08 PM
Dear Reza,
i can see the service policy but if i want to enter to control-plane host sub interface instead of other sub-interface for example transit, cef-exception so how i can do that i dont get such options to do that.
Pls refer to the link below
http://www.cisco.com/c/en/us/td/docs/ios/12_4t/12_4t4/htcpp.html#wp1082734
09-19-2017 05:50 AM
Hi all,
do you have any update regarding the topic? I have the same problem on a 4331, I even tried to activate the securityk9 license (EvalRightToUse) but it seems it doesn't support control plane subinterfaces configuration...
Thanks in advance!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide