Copp & Coppr on ISR 4331
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-31-2017 04:22 PM - edited 03-08-2019 10:48 AM
Dears,
I want to apply copp and coppr on my router, I know the commands and the way to apply but I don't know what should be classified for the copp and coppr, in other words what I shld analyze so that I can called those stuff in class-map for copp and coppr
thanks
- Labels:
-
Other Switching
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-31-2017 04:57 PM
Hi,
Here is a sample config you maybe able to use.
https://skminhaj.wordpress.com/2016/02/16/copp-control-plane-policing/
HTH
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-04-2017 01:53 PM
Dear Reza,
Any configuration example for CoPPr , Any blog or post in which it makes easy understand to configure and apply coppr for the routers.
thanks
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-04-2017 02:34 PM
Hi,
I have never heard of coppr and not sure what that is.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-05-2017 05:04 AM
Dear Reza,
Here is the link which says about cPPr
http://www.cisco.com/c/en/us/td/docs/ios/12_4t/12_4t4/htcpp.html#wp1096911
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-07-2017 06:05 AM
Dears
I dont get any control-plane host or transit or cef-exceptional command in 4331 IOS xe router
-CPE01(config)#control-plane ?
<cr>
CPE01(config)#control-plane ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-07-2017 06:05 AM
Hi,
You you need to enter the control-plane mode first. Than under control-plane you will see the option for service-policy.
HTH
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-07-2017 01:08 PM
Dear Reza,
i can see the service policy but if i want to enter to control-plane host sub interface instead of other sub-interface for example transit, cef-exception so how i can do that i dont get such options to do that.
Pls refer to the link below
http://www.cisco.com/c/en/us/td/docs/ios/12_4t/12_4t4/htcpp.html#wp1082734
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
09-19-2017 05:50 AM
Hi all,
do you have any update regarding the topic? I have the same problem on a 4331, I even tried to activate the securityk9 license (EvalRightToUse) but it seems it doesn't support control plane subinterfaces configuration...
Thanks in advance!
