switch: emergency-install usbflash0:cat3k_caa-universalk9.16.12.09.SPA.bin
The bootflash will be erased during install operation, continue (y/n)?y
Starting emergency recovery (usbflash0:cat3k_caa-universalk9.16.12.09.SPA.bin)...
call dfs_loadpartitions, retry = 1
call dfs_loadpartitions, retry = 0
usbflash0: contains unexpected values in partition table or boot sector.
Device needs formatting before use!
Reading full image into memory......................done
Bundle Image
--------------------------------------
Kernel Address : 0x5342e5d8
Kernel Size : 0x31794f/3242319
Initramfs Address : 0x53745f28
Initramfs Size : 0xdbec9d/14412957
Compression Format: .mzip
Bootable image at @ ram:0x5342e5d8
Bootable image segment 0 address range [0x81100000, 0x81b80000] is in range [0x80180000, 0x90000000].
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
File "sda9:cat3k_caa-recovery.bin" uncompressed and installed, entry point: 0x811060f0
Loading Linux kernel with entry point 0x811060f0 ...
Bootloader: Done loading app on core_mask: 0xf
### Launching Linux Kernel (flags = 0x5)
FAT: bogus number of reserved sectorsnnected network.
Initiating Emergency Installation of bundle usbflash0:cat3k_caa-universalk9.16.12.09.SPA.bin
Emergency Install failed - bundle usbflash0:cat3k_caa-universalk9.16.12.09.SPA.bin does not exist
Restarting system.ÿ
Booting...call dfs_loadpartitions, retry = 1
call dfs_loadpartitions, retry = 0
usbflash0: contains unexpected values in partition table or boot sector.
Device needs formatting before use!
Getting rest of image
Reading full image into memory...flash:cat3k_caa-base.SPA.03.02.03.SE.pkg: no such file or directory
loading flash:packages.conf
Reading full image into memory....done
Copying 'cat3k_caa-base.SPA.03.02.03.SE.pkg' into the buffer
Failed to open file: no such file or directory
Getting rest of image
Reading full image into memory...flash:cat3k_caa-base.SPA.03.02.03.SE.pkg: no such file or directory
loading flash:packages.conf
Reading full image into memory....done
Copying 'cat3k_caa-base.SPA.03.02.03.SE.pkg' into the buffer
Failed to open file: no such file or directory
The system is unable to boot automatically. The
BOOT environment variable needs to be set to a
bootable image.
