04-11-2015 12:24 AM - edited 03-07-2019 11:29 PM
Im trying to create new vrf in Nexus5548 but i got the below message
switch(config)# vrf context salem
% VRF creation from cli not allowed on this platform
switch(config)#
Here is the Version and inverntory for the switch
Software
BIOS: version 3.5.0
loader: version N/A
kickstart: version 5.0(2)N1(1)
system: version 5.0(2)N1(1)
power-seq: version v3.0
uC: version v1.2.0.1
BIOS compile time: 02/03/2011
kickstart image file is: bootflash:/n5000-uk9-kickstart.5.0.2.N1.1.bin
kickstart compile time: 10/15/2010 0:00:00 [10/15/2010 08:00:43]
system image file is: bootflash:/n5000-uk9.5.0.2.N1.1.bin
system compile time: 10/15/2010 0:00:00 [10/15/2010 09:34:05]
Hardware
cisco Nexus5548 Chassis ("O2 32X10GE/Modular Supervisor")
Intel(R) Xeon(R) CPU with 8299536 kB of memory.
Processor Board ID FOC16504DTU
Device name: switch
bootflash: 2007040 kB
Kernel uptime is 2 day(s), 18 hour(s), 51 minute(s), 32 second(s)
Last reset
Reason: Unknown
System version: 5.0(2)N1(1)
Service:
plugin
Core Plugin, Ethernet Plugin, Fc Plugin
switch(config)# sh inventory
NAME: "Chassis", DESCR: "Nexus5548 Chassis"
PID: N5K-C5548P , VID: V01 , SN: SSI164309E5
NAME: "IO Module", DESCR: "IO Module"
PID: N55-DL2 , VID: V01 , SN: FOC16513PXT
NAME: "Module 1", DESCR: "O2 32X10GE/Modular Supervisor"
PID: N5K-C5548P , VID: V01 , SN: FOC16504DTU
NAME: "Fan 1", DESCR: "Chassis fan module"
PID: N5548P-FAN , VID: N/A , SN: N/A
NAME: "Fan 2", DESCR: "Chassis fan module"
PID: N5548P-FAN , VID: N/A , SN: N/A
NAME: "Power supply 1", DESCR: "AC power supply"
PID: N55-PAC-750W , VID: V02 , SN: ART164310KM
NAME: "Power supply 2", DESCR: "AC power supply"
PID: N55-PAC-750W , VID: V02 , SN: ART16481006
Solved! Go to Solution.
04-11-2015 12:59 AM
You need a Layer 3 daughter card for VRF. A VRF can only be defined on a Layer 3 interface.
It looks like that you only have a Layer 2 module installed.
http://www.cisco.com/c/en/us/products/collateral/switches/nexus-5000-series-switches/data_sheet_c78-618603.html
Don't forget to rate all helpful posts.
04-11-2015 12:59 AM
You need a Layer 3 daughter card for VRF. A VRF can only be defined on a Layer 3 interface.
It looks like that you only have a Layer 2 module installed.
http://www.cisco.com/c/en/us/products/collateral/switches/nexus-5000-series-switches/data_sheet_c78-618603.html
Don't forget to rate all helpful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide