critical process fault, fman_fp_image, fp_0_0, rc=134(ASR 1002 Router Reload)

[shahjee3920]

Hi All,

I have been facing some critical issue on my ASR 1002 Router which is reloaded automatically and when i saw the reload reason in "Show Version" then its mentioned this reason for reload ASR Router " critical process fault, fman_fp_image, fp_0_0, rc=134".If anyone knows about this issue and how to fix this issue Please help me in this regard because i am working in a production network and i don't afford any network outage due to some Cisco BUG or anything else.Please give me some fruitful solution for it thanks all.

Cisco IOS XE Software, Version 03.16.02.S - Extended Support Release
Cisco IOS Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(3)S2, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Thu 11-Feb-16 07:18 by mcpre

Cisco IOS-XE software, Copyright (c) 2005-2016 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.

ROM: IOS-XE ROMMON

RTR2-CAB1 uptime is 2 days, 12 hours, 22 minutes
Uptime for this control processor is 2 days, 12 hours, 23 minutes
System returned to ROM by reload at 08:54:11 KSA Fri Mar 18 2016
System restarted at 19:00:15 KSA Fri May 6 2016
System image file is "bootflash:/asr1001x-universalk9.03.16.02.S.155-3.S2-ext.SPA.bin"
Last reload reason: critical process fault, fman_fp_image, fp_0_0, rc=134

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

License Level: adventerprise
License Type: Permanent
Next reload license Level: adventerprise

cisco ASR1001-X (1NG) processor (revision 1NG) with 3729461K/6147K bytes of memory.
Processor board ID FXS1903Q5TZ
6 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
8388608K bytes of physical memory.
6688767K bytes of eUSB flash at bootflash:.

Configuration register is 0x2102

[#2]

Hi,

Is this issue resolved? I have a similar case , one of my ASR-1001 Router crashed with the same message.

Please share if your issue got resolved.

Regards

Mathew

[mnsdata01]

I could only find this Bug ID: CSCvb72597.

[Mouhanad Alnaif]

I have the same Issue but I couldn't find until now any solution for this Bug

[Vsevolod Ruchin]

The same issue on ASR1001

System image file is "bootflash:asr1001-universalk9.03.16.08.S.155-3.S8-ext.bin"
Last reload reason: critical process fault, fman_fp_image, fp_0_0, rc=134

[yaqoobkk]

Today i got the same issue:

Last reload reason: Critical process cpp_cp_svr fault on fp_0_0 (rc=154)

Any solution/suggestion please

Thanks

[yaqoobkk]

ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.6.4, RELEASE SOFTWARE (fc3)

"bootflash:/asr1001x-universalk9.16.06.04.SPA.bin"

[Mahanan G]

I have faced a similar issue three days agowith an ASR-1001 Router

Can anyone please advise the remedy for this issue?

Last reload reason: critical process fault, cman_fp, fp_0_0, rc=134

Cisco IOS XE Software, Version 03.16.10.S - Extended Support Release
Cisco IOS Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(3)S10, RELEASE SOFTWARE (fc3)

Many thanks

[Tahir Khan-1977]

Hi,  same issue, with higher releases,

System restarted at 18:02:32 BST Sun Apr 30 2023
System image file is "bootflash:/asr1000-universalk9.17.10.01a.SPA.bin"
Last reload reason: Critical process fman_fp_image fault on fp_0_0 (rc=134), system report at bootflash:core/B1_RP_0-system-report_20230430-175827-BST.tar.gz

[neorbrt]

I have the same problem with asr1001x-universalk9.03.17.02.S.156-1.S2-std.SPA.bin.

Did anyone found a workaround ?

[jesquibal]

It does not seem that Cisco is really interested looking into this issue. I have the same problem for ASR 1002-HX and this unit does not come cheap! 

Why the silence. I hope someone could shed some lights here. 

[pravene-gupta]

Hi All, could you please confirm that you guys are using fair queue on tunnel interface , or using DMVPN on device. so that can help to identify the exact issue. 

[Afi GNOC]

Not using fair queue on tunnel interface , or using DMVPN on device. 

System returned to ROM by Critical process cmand fault on rp_0_0 (rc=134)

[Afi GNOC]

Was anyone able to find a fix to this? 

Kindly assist. 

[obadia1990]

facing the same issue on ASR903 Equipped with RSP2A,