Dear Gents,
i have CVR-QSFP-SFP10G(V02) installed on card N7K-F312FQ-25 inside Nexus switch 7009 .when i install 10G and 1 G sfp
it doesn't work
NX-OS 8(4).1
switch(config-if)# do sh int eth4/3
Ethernet4/3 is down (Transceiver validation failed)
if i removed sfp and keep CVR only inside line card
switch(config-if)# do sh int eth4/3
Ethernet4/1 is down (XCVR not inserted)
Ethernet4/1
transceiver is present
type is Unknown
name is --
part number is --
revision is --
serial number is --
nominal bitrate is 0 MBit/sec per channel
cisco id is --
cisco extended id number is 0
as per cisco documents CVR-QSFP-SFP10G supported with F cards and N7k
