cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1336
Views
0
Helpful
2
Replies

Default command list - Privilege Levels

tech_trac
Level 1
Level 1

hi,

Where can I find the default permitted commands against each privilege level.

2 Replies 2

Laurent Aubert
Cisco Employee
Cisco Employee

Hi,

By default there is only two levels defined:

- Level 1: User EXEC Mode

- Level 15: Privilege Exec Mode (or enable mode)

So all the commands you can't type in Level 1 require Level 15.

HTH

Laurent.

Laurent, cisco documentation does reflect that all commands default to levels 1 and 15, but testing shows otherwise. On my ISR G2 there are commands available at Level 2 that are not at level 1.

What was originally asked for is a list of commands permitted at each level. To expand on that, what would be useful is the level for each keyword of each command.

For instance, at level 1, 'show' is available but 'show interface' is not. Having a reference of all command and keyword default levels would greatly ease the privilge level design process.

Review Cisco Networking for a $25 gift card