06-29-2007 06:51 AM - edited 03-05-2019 05:02 PM
On a new Catalyst 6509 running IOS is there a way to tell which port a particular server or client is plugged into? (Without tracing patch cables)
I have done this on old switch gear with ARP and/or CAM tables. Does not appear to be the same on this new switch.
Thanks.
Solved! Go to Solution.
06-29-2007 06:55 AM
Hi
if you know the mac-address already
1) sh mac-address-table address "mac address"
If you need the IP address of the server first
1) sh arp | include "IP address".
from this you get the mac-address
2) as above.
HTH
Jon
06-29-2007 06:55 AM
Hi
if you know the mac-address already
1) sh mac-address-table address "mac address"
If you need the IP address of the server first
1) sh arp | include "IP address".
from this you get the mac-address
2) as above.
HTH
Jon
06-29-2007 07:09 AM
Exactly what I needed! Thanks Jon!
07-03-2007 11:00 PM
Good, Yes it worked !!
07-03-2007 11:03 PM
Glad to be of help :-)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide