cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
219
Views
0
Helpful
1
Replies

Problem active to balance between two equipment

rpastrana
Level 1
Level 1

Model: CISCO WS-C6509 Description of the problem: We have trunk qualified between the equipment cpdv_01 and cpdv_02. Trunk has a connection main in the FastEthernet8/19 interface and secondary in the FastEthernet9/38. The problem is that they are balancing the traffic, and leaves a similar amount in both interfaces. We opened this consultation to them so that they confirm to us if this is normal and that to make to avoid it.

cpdv_01#sho run int gi8/19

Building configuration...

Current configuration : 297 bytes

!

interface GigabitEthernet8/19

description trunk2a_telefonicasa02

no ip address

speed 1000

duplex full

no snmp trap link-status

switchport

switchport trunk allowed vlan

1,2,5-7,12,13,15,20-28,33

1 Reply 1

Amit Singh
Cisco Employee
Cisco Employee

Please explain your problem in details.. its very hard to understand the problem that you are facing with the above explanation..

-amit singh

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: