11-02-2012 11:16 AM - edited 03-07-2019 09:49 AM
Dear Team,
I am having 2960 switch and one port is configured with a VLAN and connected with an unmanageable switch and further one more unmanageable switch was connected to the primary unmanageable switch…
The topology will be 2960 switch -> unmanageable Switch -> unmanageable -> PC connected
The issue I am facing most of the PC are getting IP addresses through DHCP server and very few 5 or 6 PC’s out are not getting the IP from DHCP server.
If I switch of the switch and switch on the issue is resolved for those and it will raise for some other PC’s.
Thanks you team......
11-05-2012 03:32 AM
May I have your Physical Topology? I want to know where the DHCP Server Located? And what brand of the Unmanageable Switch are?
11-05-2012 07:36 AM
This is the same post as this: https://supportforums.cisco.com/message/3776014#3776014
Before someone can help you, you'll have to provide the requested information so that that people can make suggestions accordingly. Help us help you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide