I am having 2960 switch and one port is configured with a VLAN and connected with an unmanageable switch and further one more unmanageable switch was connected to the primary unmanageable switch…
The topology will be 2960 switch -> unmanageable Switch -> unmanageable -> PC connected
The issue I am facing most of the PC are getting IP addresses through DHCP server and very few 5 or 6 PC’s out are not getting the IP from DHCP server.
If I switch of the switch and switch on the issue is resolved for those and it will raise for some other PC’s.
Thanks you team......
May I have your Physical Topology? I want to know where the DHCP Server Located? And what brand of the Unmanageable Switch are?
This is the same post as this: https://supportforums.cisco.com/message/3776014#3776014
Before someone can help you, you'll have to provide the requested information so that that people can make suggestions accordingly. Help us help you