Difference between 9200 and 9200L

[vban]

We are migrating from a 2960 to a 9200L switch. 

Will there be any difference between the 9200 and 9200L configuration?

How to start with the configuration and setup?

[M02@rt37]

Hello @vban 

9200L is the fixed uplink model (uplinks are non-modular).

On the other hand, 9200 has modular uplinks, allowing different network modules.

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9200-series-switches/nb-06-cat9200-ser-data-sheet-cte-en.html

Also, migrating from a c2960 to a 9200L (or 9200) switch should be straightforward.

[vban]

How should I start the process for 9200L from 2960?

[Leo Laohoo]

Enter the 2960 config into the 9200/9200L one line at a time until it stops due to incorrect configuration.  Investigate why and continue.

[Joseph W. Doherty]

You may run into some differences, especially if you're running a particularly old IOS version on the 2960.

@Leo Laohoo suggestion is good.

What I personally also like to do, is use a diff comparison tool between the old config and the new config and be able to account for any differences.