cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
214
Views
0
Helpful
1
Replies
Highlighted
Beginner

Distance eigrp 90 90 WS-6500 VSS

I have a client that has WS-6500 in VSS with NSF. By deleting the command distance eigrp 90 90, the neighboring devices resynchronized their eigrp adyacency. After this, the metrics appeared as infinity, causing an instability in the network. Why this happen?

Does i need to execute a clear ip eigrp?

 

WS-6500-VSS#show ip eigrp topology 10.1.1.0/24

EIGRP-IPv4 Topology Entry for AS(10)/ID(10.1.2.1) for 10.1.1.0/24

  State is Active, Query origin flag is 1, 1 Successor(s), FD is 3328512

Waiting for 1 replies

  Descriptor Blocks:

  10.1.4.254 (GigabitEthernet1/1/1), from 10.1.4.254, Send flag is 0x0

      Composite metric is (Infinity/Infinity), route is Internal

      Vector metric:

        Minimum bandwidth is 1000000 Kbit

        Total delay is 281438776 microseconds

        Reliability is 255/255

        Load is 1/255

        Minimum MTU is 1500

        Hop count is 1

 

Everyone's tags (5)
1 REPLY 1
Highlighted
Hall of Fame Expert

Re: Distance eigrp 90 90 WS-6500 VSS

Have a look at this document for an explanation:

 

https://www.packetmischief.ca/2015/04/07/eigrp-fd-is-infinity/

HTH

Content for Community-Ad