I get the following when trying to load IOS to a switch so I can then stack it with another:
Error: The image in the archive which would be used to upgrade
Error: system number 1 does not support that system type.
I found that /allow-feature-upgrade helped others, but when I tried it, it failed to help.
Any ideas?
archive download-sw /allow-feature-upgrade /overwrite tftp://10.70.39.40/c3750-ipbasek9-tar.122-46.SE.tar
Loading c3750-ipbasek9-tar.122-46.SE.tar from 10.70.39.40 (via Vlan240): !!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
examining image...
extracting info (105 bytes)
extracting c3750-ipbasek9-mz.122-46.SE/info (611 bytes)
extracting info (105 bytes)
Stacking Version Number: 1.40
System Type: 0x00000000
Ios Image File Size: 0x008C7A00
Total Image File Size: 0x00B4CA00
Minimum Dram required: 0x08000000
Image Suffix: ipbasek9-122-46.SE
Image Directory: c3750-ipbasek9-mz.122-46.SE
Image Name: c3750-ipbasek9-mz.122-46.SE.bin
Image Feature: IP|LAYER_3|SSH|3DES|MIN_DRAM_MEG=128
Error: The image in the archive which would be used to upgrade
Error: system number 1 does not support that system type.
