10-28-2021 09:36 PM
Hi,
we are facing PRI line down issue,
Gateway model: "Cisco ISR4431 Chassis
IOS version: "bootflash:isr4400-universalk9.16.09.04.SPA.bin"
issue is that the link gets down intermittently and comes up after Jack out Jack In.
Action taken so far:
Configured clocking,
Changed the connectors, cables.
Rebooted the Gateway
Reconfigured the E1 links on other card on Gateway.
Service provider installed new MUX, also changed all the cables.
Reconfigured the CRC, Line code, and PRI configuration
But still link is facing same issue.
could you please suggest any work around or solution.
10-28-2021 09:51 PM - edited 10-28-2021 09:52 PM
Hello @MayurB ,
post the output of
show controller e1 x/y/z
and the configuraton you have under the controller e1.
if used for Voice services you should see how you have configured serial x/y/z:16 that is the control channel of the E1
generally clocking is provided by the network and you should use clock line.
Again if you have multiple E1 on your router used for Voice service there is a specific command to specify which line / controller provides the reference clock to be used on all of them internally on the router itself.
Hope to help
Giuseppe
10-28-2021 11:35 PM
Hello,
the Cisco recommended XE releases are:
Release Amsterdam-17.3.4a MD
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide