09-18-2024 01:55 AM
I am trying to configure EMM but the option to configure track is missing? Please help, thanks in advanced.
09-18-2024 02:14 AM
Hello @Kenneth Goh ,
you should provide more information to get some help
what device is involved ?
What IOS XE version is running on it ?
if you like you can post the output of
show version
Hope to help
Giuseppe
09-18-2024 07:03 AM
Hi @Giuseppe Larosa, the IOS XE version 17.9.5 rel fc1 is already shown in my post. This is a C9300-24T switch.
09-18-2024 07:13 AM
Use IPSLA directly
Or you can use
Event pattern (track down/up log message)
MHM
09-18-2024 07:29 AM
I need to use Event Manager Applet, not IPSLA, also as shown in post there is no option for event pattern. Please help provide screenshots so as to avoid misunderstandings.
09-18-2024 07:36 AM
Use eem event but I stead of track use IP sla
And pattern appear after
Event cli
MHM
09-18-2024 08:47 AM
Hello @Kenneth Goh ,
ok I apologize
see the following link about using python within EEM
it says that it should be able to perform the following actions:
Track Object read
Track Object Set
Hope to help
Giuseppe
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide