EIGRP on 6500 with IOS

[smallrain_2]

I want to turn EIGRP on 6500 switch.

Switch is running IOS 12.1 code.

Does anybody has either sample config or a good lik?

Thanks,

[spremkumar]

hi

you have enough white papers and config samples discussed over here do check this out ..

http://www.cisco.com/en/US/partner/tech/tk365/tk207/tsd_technology_support_sub-protocol_home.html

regds

[nikolasgeyer]

Hi,

I have provided some links below to Cisco documentation on configuring EIGRP.

Introduction to EIGRP - http://www.cisco.com/warp/public/103/1.html

Configuring EIGRP -http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/np1_c/1cprt1/1ceigrp.htm

Hope these help.

Nik

[smallrain_2]

we are using 6500(sup2+msfc2) and IOS. I was told that eigrp on sup2 is not full blown eigrp. I have some experience with eigrp on router but a bit reluctant to use on 6500 especially because it is in production.