10-20-2015 07:32 PM - edited 03-08-2019 02:18 AM
I have an EIGRP issue hopefully someone can help me with. I have a 2821 router with three static routes to VLANs that exist on a switch it's connected to. I want to share these routes with the rest of my network. I thought a "redistribute static" command would do this, but it does not.
I can run a "show ip eigrp topology <network> <network mask>" on the router and other equipment in the eigrp network and the network information comes up, but I can't ping any of the VLANs from anything but the router. My EIGRP statement also includes "no auto-summary" but that does not help either. Below is the results of the "show ip eigrp topology" command.
router#sh ip eigrp XXX top 10.X.47.0 255.255.255.0
IP-EIGRP (AS XXX): Topology entry for 10.X.47.0/24
State is Passive, Query origin flag is 1, 1 Successor(s), FD is 28160
Routing Descriptor Blocks:
10.X.0.15, from Rstatic, Send flag is 0x0
Composite metric is (28160/0), Route is External
Vector metric:
Minimum bandwidth is 100000 Kbit
Total delay is 100 microseconds
Reliability is 255/255
Load is 1/255
Minimum MTU is 1500
Hop count is 0
External data:
Originating router is 10.X.X.3 (this system)
AS number of route is 0
External protocol is Static, external metric is 0
Administrator tag is 0 (0x00000000)
Solved! Go to Solution.
10-22-2015 12:05 PM
That makes sense, I should've taken a look at some of the other EIGRP connections on my network to see what they had in common. Thanks for your help Jon.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide