cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2475
Views
0
Helpful
1
Replies

Enable break on all 3750 stack members

vladakoci
Level 1
Level 1

Does anyone know how to enable break on all 3750 stack members without rebooting them?

Seems '(config)#boot enable-break' works only for the current stack master.

Thanks,

Vlad

1 Accepted Solution

Accepted Solutions

manju.cisco
Level 3
Level 3

Hi,

As the master config will be present in all stack swtiches; if the current master loses its mastership, the next master will still retain boot enable-break in its configuration.

So just its presence in master config is sufficient

Thanks,

View solution in original post

1 Reply 1

manju.cisco
Level 3
Level 3

Hi,

As the master config will be present in all stack swtiches; if the current master loses its mastership, the next master will still retain boot enable-break in its configuration.

So just its presence in master config is sufficient

Thanks,

Review Cisco Networking for a $25 gift card