About manju.cisco

manju.cisco · 03-10-2012

Hi,Recently on two switches, both being same cisco WS-C3750E-24PD, running with same IOS c3750e-universalk9-mz.122-58.SE2.bingot noticed that the license state of one switch is showing incorrectly as shown belowSwithc 1) Switch#sh license In...

manju.cisco · 03-06-2012

Hi,I have a controller AIR-CT5508-K9 which is accessed remotely (both from GUI and CLI).I am unable to find the flash size of the controller.show run-config doesn't list compact flash size, show inventory, show boot also doesn't give any info on the ...

manju.cisco · 12-08-2011

Hi All,We recently connected a RPS 2300 to our switch WS-C3750G-48PS-E with IOS c3750-ipservicesk9-mz.122-53.SE2.bin..However i do not see any RPS details in the"show env" output.I believe i should get the RPS Name and its Serial and the port number ...

manju.cisco · 11-06-2011

What are Bridged ACLs ?? Is it also called as VLAN ACL (VACL) ?? Or is it also called as vlan-maps ????I am just confused what those three actually are.Someone pls help to make me understand what they means in short.Is bridged ACL can be applied on b...

manju.cisco · 11-05-2011

I recently came across this question:Q) Sort the associated traffic types give below in the correct order, based on priority (highest to lowest priority COS value)call signalling voice network management video interactive vi...

manju.cisco · 06-07-2012

Hi Mahesh,By default, the console of the standby supervisor is disabled.Probably you might try to do below and see if you can enable it Switch#conf tSwitch(config)#redundancySwitch(config-red)#main-cpuSwitch(config-r-mo)#standby console enable If th...

manju.cisco · 03-11-2012

Hi Reza,NO., both are standalone switches at different floor.Flash is having proper image name, the image name in flash is "c3750e-universalk9-mz.122-58.SE2.bin".Did no boot system and configured boot system again, and rebooted., still show version s...

manju.cisco · 03-11-2012

Hi Kevin,yes, show flash: and show boot points proper image file and secure boot-image is not implemented Any thoughts again please?Thanks,Manjunath

manju.cisco · 03-11-2012

Hi Reza,I just verified the IOS md5 signature value, it matches with cisco provided md5 value (c9dcf62d0f86e11d24550925a59fb860).So, can the IOS still be corrupted ?Question: are these switches stacked? Are you supposed to have permanant "advipservic...

manju.cisco · 03-10-2012

Hi Reza,I believe you meant to execute command "license boot level advipservices" .....advipservices not ipservices..becaues show license says advipservices as permanent.I believe the command was applied already but got noticed today, but let me reap...

Member Since	‎09-15-2010 08:48 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	180
Total Helpful Votes Received	59

User Statistics

User Activity

Incorrect License State shown on 1 Switch

How to Check Flash size on Controller 5508

RPS Status on WS-C3750G-48PS-E

Bridged ACLs

COS Value

Re: Console session disabled on standby supe 4507

Incorrect License State shown on 1 Switch

Incorrect License State shown on 1 Switch

Re: Incorrect License State shown on 1 Switch

Re: Incorrect License State shown on 1 Switch