cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
289
Views
15
Helpful
3
Replies
Highlighted
Beginner

%ENVIRONMENTAL-5-SENSOROK: Temp: Inlet_A, Location: Switch1-R0, State: normal

Hi

I am getting this message:

Syslog message generated from device HQ11-COR-11.253: Jan 22 15:46:06 10.255.255.249 1700: .Jan 22 15:45:39:
%ENVIRONMENTAL-5-SENSOROK: Temp: Inlet_A, Location: Switch1-R0, State: normal


Anyone knows what does that means and how to fix it?

 

Thanks and Regards

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Expert

Hello,

 

this is an informational message telling you that the temperature of the sensor is in the normal range. As far as I recall, the Catalyst has a number of sensors placed close to the usually hottest (e.g. the CPU) locations.

 

Check if you have the command 'snmp-server enable traps envmon temperature' configured on the switch, as the default is that environemental traps are disabled.

View solution in original post

3 REPLIES 3
Highlighted
Beginner

 

Device:C9500-48Y4C 

Version 16.12.04

Highlighted
VIP Expert

Hello,

 

this is an informational message telling you that the temperature of the sensor is in the normal range. As far as I recall, the Catalyst has a number of sensors placed close to the usually hottest (e.g. the CPU) locations.

 

Check if you have the command 'snmp-server enable traps envmon temperature' configured on the switch, as the default is that environemental traps are disabled.

View solution in original post

Highlighted

Hi Georg

 

Got it!! 

 

Thank you very much~

Content for Community-Ad