Dear All,
I don't know where can i state my problem.
I have cisco 5300xm and when connecting to it with console
I recieve the following error :
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, 5350 Software (C5350-IS-M), Version 12.4(7b), RELEASE SOFTWA
RE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Thu 13-Jul-06 20:26 by ccai
Image text-base: 0x60011084, data-base: 0x61D00000
%ALIGN-1-FATAL: Corrupted program counter 00:00:48 UTC Sat Jan 1 2000
pc=0x0 , ra=0x6002AFF8 , sp=0x636F8C70
%ALIGN-1-FATAL: Corrupted program counter 00:00:48 UTC Sat Jan 1 2000
pc=0x0 , ra=0x6002AFF8 , sp=0x636F8C70
00:00:48 UTC Sat Jan 1 2000: TLB (load or instruction fetch) exception, CPU sig
nal 10, PC = 0x0
--------------------------------------------------------------------
Possible software fault. Upon reccurence, please collect
crashinfo, "show tech" and contact Cisco Technical Support.
--------------------------------------------------------------------
-Traceback=
$0 : 00000000, AT : 62F40000, v0 : 00000018, v1 : 00000000
a0 : 00000003, a1 : 00000000, a2 : 00000000, a3 : 62C73C94
t0 : 0000E100, t1 : 3400E101, t2 : 605EEAF0, t3 : FFFF00FF
t4 : 605EEAD0, t5 : 5045443A, t6 : 45312046, t7 : 61726520
s0 : 630EC1E8, s1 : 630EC278, s2 : 00000000, s3 : 0000A0B2
s4 : 00000003, s5 : 00000018, s6 : BB000012, s7 : BB000010
t8 : 649B2AF4, t9 : 00000000, k0 : 3040C001, k1 : B0020060
gp : 62F4C1E0, sp : 636F8C70, s8 : 62100000, ra : 6002AFF8
EPC : 00000000, ErrorEPC : 41C08020, SREG : 3400E103
MDLO : 00000006, MDHI : 13DDBDD0, BadVaddr : 00000000
Cause 00000008 (Code 0x2): TLB (load or instruction fetch) exception
Bus Watcher Counters
cor_l2cache_data_ecc_count = 0
bad_l2cache_data_ecc_count = 0
cor_l2cache_tag_ecc_count = 0
bad_l2cache_tag_ecc_count = 0
cor_memory_data_ecc_count = 0
bad_memory_data_ecc_count = 0
bus_errors = 0
BCM Status Registers
A_SCD_BUS_ERR_STATUS = 0000000080000000
A_BUS_ERR_DATA_0 = 5FFBBFFD5FFE77FF
A_BUS_ERR_DATA_1 = 57CCFFF3FCFDDFFF
A_BUS_ERR_DATA_2 = FFF7FFFBFBFECFF1
A_BUS_ERR_DATA_3 = BD7FFBBF7FD737F7
A_SCD_SYSTEM_REVISION = 00000001112423FF
A_IO_INTERRUPT_STATUS = 0000000000000000
A_IO_INTERRUPT_ADDR0 = 0000000000000000
A_IO_INTERRUPT_ADDR1 = 0000000000000000
System Controller Network Interrupts:
Interrupt Register is at 0xB0020040 (0x0000048000000000)
BCM interrupt mask 0xFF7C03BEFFE0FCC2
Registered Interrupts:
Level Mask Count Data Interrupt Handler
0 0x0000000100000000 0 0x00000000 0x602FD098 (GT96124 Interrupt ha
ndler)
0 0x0000000000100000 0 0x644FEAB0 0x602E50C8 (GigabitEthernet0/1)
0 0x0000000000080000 0 0x644D5110 0x602E50C8 (GigabitEthernet0/0)
0 0x0000040000000000 0 0x00000000 0x60696250 (Low IRQ interrupt)
1 0x0000100000000000 0 0x00000000 0x60034098 (BCM1125 GPIO12 - BIT
S IRQ interrupt)
1 0x0000000000000020 0 0x63668D44 0x606A61E0 (SB1125 Timer 3)
1 0x0000000000000010 0 0x63668C7C 0x606A61E0 (SB1125 Timer 2)
1 0x0000000000000008 0 0x63668BB4 0x606A61E0 (SB1125 Timer 1)
1 0x0000000000000004 0 0x63668AEC 0x606A61E0 (SB1125 Timer 0)
1 0x0000080000000000 0 0x00000000 0x60696570 (High IRQ interrupt)
3 0x0000800000000000 0 0x00000000 0x603101E4 (OIR Interrupt)
4 0x0000400000000000 0 0x00000000 0x6069E838 (NRBUS Parity Error)
4 0x0000200000000000 0 0x00000000 0x6069E838 (IO Error)
4 0x0000004000000000 0 0x00000000 0x6069E838 (IO_BUS_Parity Error)
4 0x007C00000000E0C2 0 0x00000000 0x606A467C (Spurious Intr ERROR
Handler)
4 0x0000000000020000 0 0x00000000 0x606A5100 (Corrected ECC Error
Handler)
4 0x0000000000010000 0 0x00000000 0x606A416C (Bad ECC Error Handle
r)
4 0x0003000000000000 0 0x62D29A94 0x606A423C (BCM1125 Host LDT Bri
dge Error Handler)
4 0x0000000000040000 0 0x00000000 0x606A44F0 (BCM1125 IO-Bus Error
Handler)
4 0x0080000000000000 0 0x00000000 0x606A42C4 (BCM1125 Host PCI Bri
dge Error Handler)
6 0x0000000000000001 0 0x00000000 0x606A467C (Watchdog Timer 0 Han
dler)
HT 600MHz Retry Count 0
BCM1125H HT Host Bridge, handle=0
BCM bridge, config=0x0
(0x00):dev, vendor id = 0x0002166D
(0x04):status, command = 0x00100107
(0x08):class code, revid = 0x06000003
(0x0C):hdr, lat timer, cls = 0x00010000
(0x18):bus id registers = 0x001B0100
(0x1C):secondary status = 0x00000141
(0x20):mem base/limit = 0x5FF04300
(0x30):io upper limit/base = 0x00010001
(0x34):capabilities ptr = 0x00000040
(0x38):expansion rom bar = 0x00000000
(0x3C):bridge ctrl = 0x00020000
(0x40):LDT cmd, cap id, = 0x20000008
(0x44):Link config/control = 0x00000020
(0x48):Link frequency = 0x801F0423
(0x50):SRIcmd, srirxden, sritxden = 0x50211010
(0x54):SRI tx numerator = 0x0000FFFF
(0x58):SRI rx numerator = 0x0000FFFF
(0x68):Error status/control = 0x00009A49
(0x6C):Tx ctrl, databufalloc = 0x00041515
(0xC8):Tx buffer count max = 0x00FFFFFF
(0xDC):Rx CRC expected = 0xBBBFD57E
(0xF0):Rx CRC received = 0xFDCF1EF4
BCM PCI Host Bridge:
bus_no=0, device_no=0
DeviceID=0x0001, VendorID=0x166D, Cmd=0x0146, Status=0x02A0
Cls=0x06/0x00/0x00, Rev=0x03, LatencyTimer=0x2C, CacheLineSize=0x10
BaseAddr0=0x60000008, BaseAddr1=0x00000000, MaxLat=0x00, MinGnt=0x00
SubsysDeviceID=0x0000, SubsysVendorID=0xFFFF, ErrorAddr=0x41010908
Additional Status = 0x00000020
PLX HT2PCI Bridge A for PCM Tracer & DFC 2,4,6, handle=0
PLX HT7520 bridge, config=0x0
(0x00):dev, vendor id = 0x74501022
(0x04):status, command = 0x02300107
(0x08):class code, revid = 0x06040012
(0x0C):hdr, lat timer, cls = 0x00810000
(0x18):bus id registers = 0x000E0201
(0x1C):secondary status = 0x02200141
(0x20):mem base/limit = 0x4FF04300
(0x30):io upper limit/base = 0x00010001
(0x34):capabilities ptr = 0x000000A0
(0x3C):bridge ctrl = 0x00020000
(0x40):miscellaneous = 0x00000004
(0x4C):prefetch ctrl = 0x00000446
(0xC0):ht cmd, cap id = 0x00410008
(0xC4):link cfg/ctrl side a = 0x00112020
(0xC8):link cfg/ctrl side b = 0x770020D0
(0xCC):link freq ctrl side a = 0x00350422
(0xD0):link freq ctrl side b = 0x00350402
PLX HT2PCI Bridge B, for DFC 1,3,5,7
(0x00):dev, vendor id = 0x74501022
(0x04):status, command = 0x02300107
(0x08):class code, revid = 0x06040012
(0x0C):hdr, lat timer, cls = 0x00810000
(0x18):bus id registers = 0x001B0F01
(0x1C):secondary status = 0x022001A1
(0x20):mem base/limit = 0x5FF05000
(0x30):io upper limit/base = 0x00010001
(0x34):capabilities ptr = 0x000000A0
(0x3C):bridge ctrl = 0x00020000
(0x40):miscellaneous = 0x00000004
(0x4C):prefetch ctrl = 0x00000446
GT 96124 PCI Registers:
(0x00):dev, vendor id = 0x967A11AB
(0x04):status, command = 0x02A00007
(0x0C):hdr, lat timer, cls = 0x0000F800
(0x20):internal regs mem-maped bar = 0x41000000
(0x24):internal regs io-maped bar = 0x00000001
Writing crashinfo to flash:crashinfo_20000101-000048
00:00:48 UTC Sat Jan 1 2000: TLB (load or instruction fetch) exception, CPU sig
nal 10, PC = 0x0
I need and immidiate help !!!!
thank you very much for your help
