cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1178
Views
0
Helpful
0
Replies

Event 'link_up' is invalid for the current state 'trunk'

Denis Reshetov
Level 1
Level 1

I have Cisco 2921 with EHWIC-4ESG in slot0 and stack of Cisco 3750-X-24 (2 switches).

Gi0/0/0 on 2921 connected to Gi1/0/11 on 3750, Gi0/0/1 on 2921 connected to Gi2/0/11 on 3750

Gi0/0/0 and Gi0/0/1 was configuted as:

switchport access vlan 7

switchport mode trunk

storm-control broadcast level 30.00 15.00

Gi1/0/11 and Gi2/0/11 was configured as:

switchport access vlan 7

switchport trunk encapsulation dot1q

switchport trunk allowed vlan 1,7,1002-1005

switchport mode trunk

OSPF was configured on 2921 and 3750 through interface vlan 7 (vlan 7 exists on 2921 and 3750)

2921 is new router, it was connected in Tuesday. Port Gi0/0/1 was blocked by spanning tree. OSPF was working. Everithing was ok.

Today (Friday) 2921 was reloaded and while booting i see error in log:

Apr 26 07:34:55: %SM-4-BADEVENT: Event 'link_up' is invalid for the current state 'trunk': pm_port_eswilp 0/1 -Traceback= 0x216A1100z

OSPF dosn't work.

I change configuration on Gi0/0/0 and Gi1/0/11 from trunk to access mode, and everithing became OK again.

I dont understand what's the problem I have. Is it bad EHWIC or thunk misconfiguration (but it warks for 3 days)

0 Replies 0
Review Cisco Networking products for a $25 gift card