06-10-2010 04:52 PM - edited 03-06-2019 11:31 AM
hi all
is there any command we can use to export the arp cache in the cisco 6509 switch to TFTP server
Karthik
Solved! Go to Solution.
06-10-2010 10:09 PM
Hi
It depend on version of your device. In newer version you can do it by:
sh ip arp vrf
or just
sh arp | redirect tftp:
for oldest version you need to write tcl script which will be copy output of "sh arp" in local file and then copy this file to tftp sever.
But simplest way is to get arp table by SNMP.
regards.
06-10-2010 10:09 PM
Hi
It depend on version of your device. In newer version you can do it by:
sh ip arp vrf
or just
sh arp | redirect tftp:
for oldest version you need to write tcl script which will be copy output of "sh arp" in local file and then copy this file to tftp sever.
But simplest way is to get arp table by SNMP.
regards.
06-18-2010 11:49 AM
thanks it worked
08-01-2014 09:31 PM
Thanks, works very good.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide