12-29-2013 04:56 PM - edited 03-07-2019 05:17 PM
Hi Guys,
One of our WAAS device is directly connected to service provider router directly(there is medium in middile), whenever we see the interface status at provider end device we found the duplex setting as half duplex/100 Mbps but though there is no drops between the devices . But we are facing general slowness in our network .While disable the WAAS its getting solve, Kindly suggest why the duplex is showing mismatch on two sides. Also is this affecting our performance issue ? is there any best practice ?
12-29-2013 05:36 PM
If you have your side set to auto and the provider side is hard coded to 100/full, you will negotiate at 100/half. You'd need to hard code your side to 100/full to see full duplex.
HTH,
John
*** Please rate all useful posts ***
12-30-2013 07:30 PM
Hi John,
Small querry , How to force hardcore fastettheret from normal interface ? also what is the difference from normal interface ?
Thanks
Manik.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide