11-03-2010 03:45 AM - edited 03-06-2019 01:51 PM
Hi Guys,
Hoping someone could help me, I'm trying to configure my Cisco 877 ADSL border. It uses the ATM interface to talk to the ADSL. The fetch TV uses Multicast IP streams for the "on demand" TV
Here is my config:
version 15.1
no service pad
service timestamps debug datetime
service timestamps log datetime
service password-encryption
!
hostname modem
!
boot-start-marker
boot system flash c870-advipservicesk9-mz.151-1.T.bin
boot-end-marker
!
logging buffered 65535
logging console informational
enable secret 5 $1$..Bq$NExIrcIg236vxFoCKMjOC1
!
aaa new-model
11-13-2010 08:48 PM
Bump
11-14-2010 10:28 PM
Hi,
I'm not seeing "ip multicast-routing" Global Config Command in your posted config. Kindly check and update.
Thanks,
ThiyaguVG.
11-14-2010 11:21 PM
Here is an updated config that I've added together.
version 15.1
no service pad
service timestamps debug datetime
service timestamps log datetime
service password-encryption
!
hostname modem
!
boot-start-marker
boot system flash c870-advipservicesk9-mz.151-1.T.bin
boot-end-marker
!
logging buffered 65535
logging console informational
enable secret 5 <
!
aaa new-model
!
!
aaa authorization exec default local
!
aaa session-id common
!
clock timezone EST 10
clock summer-time AEST recurring last Sun Oct 2:00 last Sun Mar 2:00
clock save interval 8
!
<
!
dot11 syslog
ip source-route
!
ip cef
no ip bootp server
ip domain name tehintartubes.net
ip name-server 203.0.178.191
ip multicast-routing
ip multicast auto-enable
no ipv6 cef
!
multilink bundle-name authenticated
!
archive
log config
hidekeys
!
!
ip ssh time-out 90
ip ssh authentication-retries 2
ip ssh version 1
!
bridge irb
!
interface ATM0
description --- ADSL IF ---
no ip address
ip pim nbma-mode
ip pim version 1
ip pim bsr-border
ip pim sparse-dense-mode
ip igmp version 3
ip igmp limit 64000
ip igmp unidirectional-link
ip igmp proxy-service
no atm ilmi-keepalive
pvc 8/35
tx-ring-limit 3
encapsulation aal5snap
protocol ppp dialer
dialer pool-member 1
!
!
interface ATM0.1 point-to-point
description IPTV-PVC
ip pim sparse-dense-mode
ip igmp unidirectional-link
atm route-bridged ip
!
interface ATM0.2 point-to-point
ip pim sparse-dense-mode
ip multicast boundary 101 in
ip multicast boundary 101 out
ip multicast boundary 101 filter-autorp
ip igmp unidirectional-link
ip igmp mroute-proxy ATM0
ip igmp proxy-service
atm route-bridged ip
bridge-group 1
bridge-group 1 spanning-disabled
pvc iptv-vc 0/35
encapsulation aal5snap
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
description ---AUTHLAN---
no ip address
ip virtual-reassembly
bridge-group 1
!
interface Vlan2
no ip address
shutdown
!
interface Dialer0
description ---PPPDialler---
ip address negotiated
ip nat outside
ip virtual-reassembly max-reassemblies 1024
encapsulation ppp
dialer pool 1
dialer-group 1
ppp chap refuse
ppp pap sent-username <
no cdp enable
!
interface BVI1
ip address 124.148.137.118 255.255.255.252 secondary
ip address 192.168.12.253 255.255.255.0
ip pim sparse-dense-mode
ip multicast boundary 101 in
ip multicast boundary 101 out
ip multicast boundary 101 filter-autorp
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
ip igmp helper-address 202.58.240.35
ip igmp version 3
ip igmp mroute-proxy ATM0
ip igmp proxy-service
!
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
!
!
ip dns server
ip nat translation tcp-timeout 500
ip nat translation udp-timeout 30
ip nat translation finrst-timeout 30
ip nat translation syn-timeout 30
ip nat translation dns-timeout 30
ip nat translation icmp-timeout 30
<< static translations omitted >>
ip nat inside source list 1 interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 Dialer0
!
!
map-class atm iptv
logging trap debugging
logging 192.168.12.250
access-list 1 permit 192.168.12.0 0.0.0.255
access-list 101 permit ip 224.0.0.0 31.255.255.255 any
!
!
!
!
snmp-server community public RW
snmp-server ifindex persist
snmp-server trap link ietf
snmp-server trap-source ATM0
snmp-server location RACK1
snmp-server contact Jeffy
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
!
!
snmp-server community public RW
snmp-server ifindex persist
snmp-server trap link ietf
snmp-server trap-source ATM0
snmp-server location RACK1
snmp-server contact Jeffy
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
!
!
control-plane
!
bridge 1 protocol ieee
bridge 1 route ip
!
line con 0
password 7 <
no modem enable
line aux 0
line vty 0 4
access-class 1 in
privilege level 15
transport input telnet ssh
!
scheduler max-task-time 5000
ntp source Dialer0
ntp master
ntp server 211.31.132.130
ntp server 192.231.203.132
ntp server 211.31.132.139
sntp server 192.231.203.132
end
01-24-2015 04:10 PM
Were you able to get this resolved mate?
Thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide