cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1122
Views
0
Helpful
2
Replies

Flash Keyword in 6500 boot system command

malcolmsalmons
Level 1
Level 1

Hi

I'm trying to determine the point of the flash keyword in the boot system command on a Sup-720. From what I can see I dont need to specify it but I would be interested to know if there is a good reason to specify it?

For example I can spectify:

boot system sup-bootdisk:IMAGENAME.bin

and everything works fine. However in the command reference it seems to indicate that I should put the following in:

boot system flash sup-bootdisk:IMAGENAME.bin

If anyone can clarify this then it would be appreciated.

Thanks

Malcolm

2 Replies 2

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

Usually, you specify the media in the statement, so you know which one you are booting from:

Here is an example:

boot system flash bootdisk:s2t54-advipservicesk9-mz.SPA.150-1.SY1.bin

HTH

Hi Reza

What I was actually after was whether I need to specify the keyword "flash" in the boot system command? I know the switch boots correctly when flash isnt included in the boot system command but was wondering if there were any reasons to include the flash keyword?

Thanks

Malc